IT HAD TOO HIGH OF A PROFILE AT THIS STAGE OF DEVELOPEMENT-
NEED TO LOWER THAT CENTER OF GRAVITY!!
With the steering column moved forward of the front
axle, the seat could be cut into main frame,
just high enough to clear the batteries.
The foot rests were later lowered about 3 inches.
See Below! The finished product,,,,, 'til it changes AGAIN!!!




This is the latest picture.
October 4, 2004.
It has a load of parts for
the next project on the back.
Tires, wheels and forks for
an Electric 2-wheeler.

The 3 dowels in front of the
seat are the drink holder.
Another brake and pedal was
added to the right side later.